Create a Machining RFQ Now!

How SourceAuthority Works!

Four Easy Steps:

Select machining category and complete online request form

Receive machine shop quotes online

Collaborate with machine shops throughout the project.

Select the best machine shop for your needs.

Create a Machining RFQ Now!

Expert In The Field?

Help us improve our content. If you have written a white paper about this machining process submit it for publication on our site.

Saw Cutting: A Machining Process

Get Quotes for Saw Cutting Services

Source the right machining suppliers to produce your machined parts and assemblies on time and within budget. SourceAuthority will instantly match your requirements with qualified local, regional and national machine shops.

Create a Request for Quote for Machining Services now! It’s free. Do you supply Machining Services? Click here.

Screw Machining
Screw machining is an automated machining process very similar to that of CNC turning. A screw machine is configured in a very similar manner to a lathe in as much as the spindle is positioned horizontally and spins the part removing material in chips with a stationary tool to reduce the outside diameter.

While screw machines may require an extensive set-up; once running, a single operator can monitor the operation of several screw machines each producing different parts. It is hotly debated that screw machines can outperform any other turning machine in speed and cost of production in high volumes.

The argument for the screw machine’s speed and economic production is greatly aided with the addition of multiple spindles. One common configuration includes six spindles, each holding a bar of material. As the machining operation advances the machine’s turret indexes bringing up a new tool to perform the next machining task. These tasks may include facing, turning, threading, drilling and cutoff among others.

Unlike operations on a lathe where single point tools and CNC programming are primarily utilized to turn complex shapes, a screw machine may have form tool which has been ground to create a negative shape.

Traditional screw machines are “programmed” for operation by the use of cams and trip dogs. As cams are unique to each job, they have to be manufactured accordingly. Cams and trip dogs control the machines spindle speeds, stock feeds, infeeds, turret rotation and the length of the feed stroke. Set up for a beginner can be difficult.

While screw machining has lost some of its appeal with the advent of CNC lathes they remain popular for those that must manufacture high volume small diameter turned parts.

Swiss Screw Machining
The term “Swiss screw machining” is derived from a type of screw machine that was first developed and manufactured in Switzerland. It was originally developed to make small turned watch parts.

Because the Swiss screw machine was developed to manufacture such small parts which required exacting tolerances, it is capable of holding +/- 0.0005 inches and 0.001 inches in both length and width on a part that is ¼” in diameter and up to 8” long. This is achieved because all turning is done while the material is fully supported.

Production speeds are greatly enhanced with the addition of an automatic bar feeder which is great considering this cam driven machine can take between four and eight hours to program.

---

Get Quotes for the Following Machining Processes! Click on a category to learn more.

Horizontal Boring Jig Boring Vertical Boring Broaching / Splining Drilling Ram EDM Wire EDM Engraving Gear Cutting Grinding Centerless Grinding Cylindrical Grinding

Flat Grinding Internal Grinding Jig Grinding Honing Large Machining Multi-axis Machining Precision Machining Screw Machining Swiss Screw Machine Turning Milling Saw Cutting

Slotting Tapping Thread Cutting Thread Grinding Thread Rolling CNC Drilling CNC Grinding CNC Machine Center CNC Milling CNC Turning